LED strips 220V-240V AC

Our 220V LED strips are directly connected to the 220V power grid. For this you only need a cable with bridge rectifier. For that reason they are very easy to install, and they are also flexible. They can be installed both indoors and outdoors, as they have a protective layer that isolates them from natural phenomena such as humidity, dust ... ...

Our 220V LED strips are directly connected to the 220V power grid. For this you only need a cable with bridge rectifier. For that reason they are very easy to install, and they are also flexible. They can be installed both indoors and outdoors, as they have a protective layer that isolates them from natural phenomena such as humidity, dust ... Ah! And you can cut them every meter! For exterior use it is necessary that the insulators be suitably silicone for outdoor use. Get your LED strips in FactorLED customized from 1 meter to 50 meters!

More
Showing 1 - 15 of 17 items
  • New
    15,92 €

    This device eliminates the flickering of 220v LED strips when its cause is due to the current produced by the voltage loads that feed the LED lights. The device stores the voltage and regulates its flow to avoid the flickering of the strips fed at 220v. LED strip 220V Ref. 2835-120P-S-230V

    Ref: PHLDR90568

    Add to cart
  • New
    54,77 €

    Professional LED strip 220v - DIRECT TO MAINS WITHOUT VOLTAGE DROP - NO RECTIFIER SOURCE REQUIRED = DIRECT 220V. It has adhesive tape to facilitate its installation; to increase its useful life it is advisable to install it on an aluminium profile to achieve good heat dissipation. High luminosity SMD2835 diodes. Cut every 10 cm.

    Ref: 2835-120P-AC220-14W

    Add to cart
  • From 52,40 €

    5W SMD2835 LED strip coil with 120/LEDs per meter at 220V. This product requires a RECTIFIER to be installed.  Perfect for LIGHTING all kinds of spaces. For outdoor use IP65 sealing is required to conveniently protect the joints. The product includes: Rectifier cable + LED strip + End cap. Size: 15mm. Includes staples and screws for easy installation CUT...

    Ref: 2835-120P-S-230V

    Add to cart
  • Runs out!
    2,96 €

    Current rectifier for the 230V single-colour LED Neon to the mains without the need for a transformer. Each rectifier cable supports a maximum of 400w of 230V LED Strip with reference number 2835-120P-S-230V

    Ref: 8202

  • 0,59 €

    in factorled.com you will find the connector of union for led strips to 230V. Ideal for led strips with silicone. We recommend the use of heatsink tape and aluminium profile for longer life

    Ref: 8201

  • 13,79 €

    15W COB LED strip Dimmable at 230V and 50 meters with adhesive tape to facilitate installation. Designed for indoor and outdoor placement. Perfect for LIGHTING all kinds of spaces. DOES NOT NEED RECTIFIER SOURCE = DIRECT 220V. -NO VOLTAGE DROPS-. 1 UNIT = 1 METER OF LED STRIP (SELECT THE METERS YOU NEED) MAXIMUM 50 METERS

    Ref: 15COB65

    Add to cart
  • 9,85 €

    -LED LIGHTING 220v. CUTTING. The product includes: Rectifier cable + LED strip + End cap. Measurement: 15mm. 60 SMD 5050 Diodes per meter is connected directly to the power supply through a rectifier cable required. For outdoor use IP65 it is necessary to seal to protect the joints properly. 1 UNIT = 1 METER OF LED STRIP (SELECT THE METERS YOU NEED)...

    Ref: 1028

    Add to cart
  • 183,60 €

    The high brightness 220V AC Dimmable LED Strip with 60 SMD5050 Diodes per meter connects directly to the power supply via a required rectifier cable. For outdoor IP65 use, sealing is required to conveniently protect the joints. The product includes: Rectifier cable + LED strip + End cap. Size: 15mm. 

    Ref: 1029

    Add to cart
  • 4,83 €

    -LED LIGHTING 220v. TO CUT- The product includes: Rectifier cable + LED strip + End cap. Measurement: 15mm. 180 Diodes SMD2835 per meter is connected directly to the power supply through a rectifier cable required. For outdoor use IP65 it is necessary to seal to protect the joints properly. 1 UNIT = 1 METER OF LED STRIP (SELECT THE METERS YOU NEED)...

    Ref: 1020

    Add to cart
  • 139,97 €

    The high brightness 220V AC Dimmable LED Strip with 120 SMD2835 Diodes per meter connects directly to the power supply via a required rectifier cable. For outdoor IP65 use, sealing is required to conveniently protect the joints. The product includes: Rectifier cable + LED strip + End cap. Size: 15mm. 

    Ref: 1019

    Add to cart
  • 110,42 €

    The high brightness 220V AC Dimmable LED Strip with 120 SMD2835 Diodes per meter connects directly to the power supply via a required rectifier cable. For outdoor IP65 use, sealing is required to conveniently protect the joints. The product includes: Rectifier cable + LED strip + End cap. Size: 13mm. 

    Ref: 1021

    Add to cart
  • 4,24 €

    -LED LIGHTING 220v. TO CUT- The product includes: Rectifier cable + LED strip + End cap. Measurement: 13mm. 120 Diodes SMD2835 per meter is connected directly to the power supply through a rectifier cable necessary for outdoor use IP65 is required to seal the joints. 1 UNIT = 1 METER OF LED STRIP (SELECT THE METERS YOU NEED) MAXIMUM 50 METERS

    Ref: 1022

    Add to cart
  • 0,06 €

    With this type of transparent cap, it is possible to hold the 13mm and 15mm 220v LED strips more easily. It is a product suitable for indoor and outdoor use. Important: For outdoor use it is essential to siliconize the cap to insulate it properly.  

    Ref: 1030

    Add to cart
  • 1,38 €

    It allows the union and connection between different sections of the 220V Monocolor LED Strip with ease and safety. For outdoor use IP65 it is necessary to seal to protect the joints properly.

    Ref: 1031

    Add to cart
  • Runs out!
    2,07 €

    It allows direct connection of the monocolour LED strip to the 220V electrical network, without the need for transformers or any other additional device.

    Ref: 1032

    Add to cart

LED strips 220V-240V AC

New products

Specials

No special products at this time.