13 LED  MAX Tube Glass  300º   90cm - 150Lm/W

LED MAX Tube 13W Glass 300º 90cm - HIGH LUMINOSITY

  • Rated Power


  • Nominal Voltage


  • CRI - Chromatic Rendiment Index


  • Luminosity-Lm

    1690 Lm

  • Beam Angle (º)


  • Luminous Efficiency (Lm/W)


  • IP


  • Diode Life Expectancy (H)


  • Dimensions (mm)


Brightness calculation
Delivery in 48/72 hours
15 days to Make Returns
25 item(s) per box

Energy Class A++ CE Certificate ROHS Certificate

4,14 € TAX Included

  • Available
  • Available


4,14 €

To avoid breakage in transport, the minimum quantity is: 2

Data sheet

Rated Power : 13W
Nominal Voltage: 175-265V
Colour: 4000K-6000K
CRI - Chromatic Rendiment Index: 80
Energy Rating: A++
Luminosity-Lm: 1690 Lm
Number & Type of LEDs: Epistar SMD 2835
Beam Angle (º): 300º
Luminous diodo LED (Lm/W): 150Lm/W
Luminous Efficiency (Lm/W): 130Lm/W
Base: T8
Certifications: CE - ROHS
IP : IP20
Diode Life Expectancy (H): 30.000
Dimensions (mm): 900
Power Factor (PF): 0.95
Frequency (Hz): 50/60Hz
Temperature Range (ºC): -20°C ~ +55°C
On/Off Cycles: 100.000
Starting Time (s): 0,2s
Construction Material: Glass+PC
Other Information: Connection to one end
Warranty Years: 3

More info


LED MAX Tube 13W Glass  300º   90cm - HIGH LUMINOSITY

The MAX LED TUBE HIGH LUMINOSITY T8 90cm SMD 2835 EPISTAR 150 Lm/W  and power of 13W represents an excellent and economical solution for the replacement of T8 fluorescent tubes. Its direct connection to the mains supply allows to eliminate the remaining consumption of the ballasts and ballasts, by allowing a longer lifespan, lower maintenance requirements, a fast ignition and a flicker-free effect. Includes LED starter.

This T8 tube has a single-end connection, which is screen printed. To optimize energy consumption, the primer must be replaced and the ballast of the old fluorescent tubes eliminated.  It has 150Lm/W Epistar 2835 SMD Diode and a high light transmission glass coating that allows for uniform distribution.  Angle of 300 º.

It has a power factor greater than 0.90. Its operation is 175-265V and has an CRI higher than 80%. Opal cover that does not produce glare. It also has short-circuit protection and overheating.

Achieve greater savings, avoid flickering light in the lighting of the luminaire and thus achieve instant ignition with this LED tube.

Aplications for the LED MAX Tube 13W Glass  300º   90cm - HIGH LUMINOSITY

  • Kitchens
  • Shops
  • Office
  • Garages

restaurant lighting

In FactorLED we are committed to our products are of QUALITY and offer the necessary elements for DISTRIBUTION, IMPORT or WHOLESALE, including the technical sheet of each LED product.


7 other products in the same category: