TENNESEE Linear Batten Light
1 producto
Integroitu LED-lineaarinen palkki - Pinta - TENNESEE HOPEA -24V- 0,5m - 1m - 1,5m - 2m
46,89 €
ALV sisältyy
Ref: 01014-P
TENNESEE Linear Batten Light: how a 24V installation is powered
The TENNESEE Linear Batten Light is a surface fitting with a silver body, available in 0.5 m, 1 m, 1.5 m and 2 m and supplied at 24V. Its selector includes 3000K, 4000K and 6000K as well as blue, green and red. Because it works at low voltage, it needs a power supply between the mains and the fitting.
What a power supply does
The mains arrives as alternating current at mains voltage, and the batten runs at 24V DC. The power supply — also called a transformer or driver — is the unit that makes that conversion and delivers to the fitting the steady voltage it expects.
Why these profiles work at low voltage
Low voltage allows for slimmer profiles, because part of the electronics leaves the fitting and is concentrated in the power supply, which is also left accessible at one specific point of the installation.
What to bear in mind when spreading out several units
When several battens share the same line, the power supply must be sized for the total load it is going to feed, not for a single unit. It is worth planning where it will sit and weighing up the split: sometimes it is better to feed two shorter groups than to run a single very long line. These calculations depend on the project and must be checked against the equipment specifications.
- Finish: silver
- Lengths: 0.5 / 1 / 1.5 / 2 m
- Voltage: 24V, requires a power supply
- Selector: 3000K, 4000K, 6000K, blue, green and red
Plan the power supply before installing, choose the length and the type of light, and add the TENNESEE Linear Batten Light to your order.
Frequently asked questions
Does the TENNESEE Linear Batten Light need a power supply?
Yes. It runs at 24V, so it requires a supply that converts mains voltage into low voltage.
Can I feed several units from the same power supply?
Yes, as long as the supply is sized for the total load of the whole set and not just for one batten.
Which light options does it offer?
White in 3000K, 4000K and 6000K, plus blue, green and red.
Más en Lineaariset Pinta-asennusvalaisimet